Castle Molds	Gothic Molds	Fieldstone Molds	Cavern Molds	Village Molds
Egyptian Molds	RomanMolds	Sci-Fi Molds	Floor Molds	roof Molds

	Description
	Basic Block Mold #40
	Used for building simple walls and structures. Contains several long one-piece blocks.
	Price $34.00

	Description
	Wizard's Tower Mold #50
	Will make all blocks needed to build the wizard's tower. Includes arrow slit block, round window, and decorative braces.
	Price $34.00

	Description
	4" Circular Tower Mold #52
	Will make all blocks needed to build the Circular Tower. It measures 4" outside diameter. Also contains arrow slit blocks, decorative braces, circular stairway pieces and blocks to seamlessly splice curved towers into existing flat walls.
	Price $34.00

	Description	Click here for instructions on building the bridge.
	Bridge Mold #53
	Will make all blocks needed to build the traveler's bridge. Special pieces include a 3" wide archway, bridge railings, stair builder block, and decorative trim pieces.
	Price $34.00

	Description
	Inn Building Accessories Mold #57
	This mold is used to help finish the interior of an inn. Includes spiral and straight stairway pieces and rails, small stone pieces for fireplaces and ovens, wooden panels, rails and shelves, table and bench.
	Price $34.00

	Description
	Common Inn Accessories Mold #58
	This mold has commonly used items to dress up the interior of an inn. Includes 2 doors, bar counters, shelves, ship stairs, chairs round and square tables, chairs, window inserts and other small accessories.
	Price $34.00
Caution! This mold contains several small detailed bits that are more difficult to cast them normal. To get good results you need to use a surfactant and a vibrating table to get the plaster into the small pockets of the mold. Please refer to the Advanced Casting Instructions page on using a surfactant and vibrating table.

	Description
	Unique Inn Accessories Mold #59
	This mold has many tiny bits used to dress up an inn. Includes wardrobe, bed, desk, cabinets, shelves, wine rack, bottles, books, dishes and other tiny accessories.
	Price $34.00
Caution! This mold contains lots of tiny tiny bits! To get good results you need to use a surfactant and a vibrating table to get the plaster into the small pockets of the mold. Please refer to the Advanced Casting Instructions page on using a surfactant and vibrating table.

	Description	Click here for instructions on building the tower.
	Prison Tower Mold #60
	This mold will make all of the blocks needed to build the Prison Tower. Includes 2 new sizes of Roman arches, decorative corner blocks plus special pieces to make wrap-around stairways.
	Price $34.00

	Description	Click here for instructions on how to use the turret mold.
	Turret Mold #61
	This mold will make all of the blocks needed to build small round towers and turrets. It measures 3" outside diameter. It includes a domed roof, round window, decorative base for corner turrets and blocks to seamlessly splice round turrets into existing flat walls.
	Price $34.00

	Description	Click here for instructions on building the tower.
	Octagon Tower Mold #63
	Will make blocks to build a 5" wide octagon tower (measured outside from flat to flat). Additional basic blocks are needed to build the tower. It includes a new style of arrow slit, brick edged window arches and trim pieces.
	Price $34.00

	Description	Click here for instructions on building the tower.
	8" Round Tower Mold #64
	Will make blocks to build an 8" outside diameter tower. It includes basic building blocks, an arrow slit and decorative top pieces. Also includes 9" pieces to finish the top of the tower.
	Price $34.00

	Description	Click here for instructions on building the ruined tower.
	Ruined Tower Mold #65
	Will make all the blocks needed to make the ruined tower. Includes pieces for both 8" and 4" diameter circular walls, large and small arches, octagonal pillars, floor tiles and a circular stair builder piece.
	Price $34.00

	Description	Click here for instructions on building the tower.
	6" Round Tower Mold #66
	Will make blocks to build a 6" outside diameter tower. It includes basic building blocks, an arrow slit, round topped window, circular stairs, decorative top pieces and a 7" piece to finish the top of the tower.
	Price $34.00

	Description	Click here for instructions on painting these accessories.
	Cavern Accessory Mold #85
	This mold will create the accessories shown which include barrels, crates, bucket, chest, crystals, grain sacks, campfire, coin pile, rock door, steel door, vase, wooden post and other items.
	Price $34.00

	Description	Click here for instructions on using this Mold.
	Wooden Conical Roof Mold #86
	This mold will make conical wood shingle roofs to fit 3", 4", 6" and 8" diameter towers. Also includes wooden braces and top decoration. The inside of the blocks have a fieldstone texture.
	Price $34.00

	Description	Click here for instructions on using this Mold.
	Slate Conical Roof Mold #87
	This mold will make conical slate shingle roofs to fit 3", 4", 6" and 8" diameter towers. Also includes stone braces and top decoration. The inside of the blocks have a chipped stone texture.
	Price $34.00

	Description	Click here for instructions on using this mold.
	Stone Arch Wall Mold #88
	This mold will create short wall sections 3/4" in height. These wall sections allow a clear view of figures and game markers for many board games.
	Price $34.00

	Description	Click here for instructions on using this mold.
	Round Connector Pieces Mold #164
	Used to connect a straight wall section into a gradually curving wall. It includes connector blocks for the 8" round tower (mold #64), the 4" circular tower (mold #52) and the 3" turret (mold #61). This mold will not make a round tower on it's own.
	Price $21.00

	Description
	Wall Builder Mold #200
	Used to make quick wall sections, floors and walkways. Click here to see examples of how this mold can be used.
	Price $29.00

	Description	Click here for instructions on using this mold.
	Floor Tiles Various Sizes Mold #201
	Used for floor tiles, steps and floor mosaic designs. Regular chipped stone texture.
	Price $29.00

	Description
	Smooth Floor Tiles Various Sizes Mold #202
	Used for floor tiles, steps and floor mosaic designs. These smooth tiles have a slight bevel on the edges.
	Price $29.00

	Description
	Cracked Floor Tiles Mold #203
	These floor tiles have a smooth worn surface with random cracks. If you don't want the cracks, see mold #206 instead.
	Price $29.00

	Description	For instructions on how to paint this tile to look like lava, visit our Painting Instructions page.
	Large Cracked Floor Tiles Mold #204
	These 1 1/2" floor tiles have a smooth worn surface with random cracks.
	Price $29.00

	Description	Click here to see how this mold was used for floors in the Gothic Dungeons.
	Gothic Floor Tiles Mold #205
	Includes a variety of floor styles such as border tiles, herring bone brick tiles, diamond pattern tiles and two styles of fancy smooth tiles.
	Price $29.00

	Description
	Worn Floor Tiles Mold #206
	These floor tiles have a smooth worn surface. These tiles are exactly like the tiles on mold #203 except without the cracks.
	Price $29.00

	Description
	Rock Floor Tiles Mold #207
	These 1" floor tiles have a natural rock slab texture.
	Price $29.00

	Description
	1.5" Rock Floor Tiles Mold #208
	These 1.5" floor tiles have a natural rock slab texture.
	Price $29.00

	Description
	Cobblestone Mold #210
	Used to make cobblestone streets and floors. Click here to see examples of how this mold can be used.
	Price $29.00

	Description
	Large Cobblestone Mold #211
	Used to make cobblestone streets and floors. These pieces interlock in order to hide the seam lines.
	Price $29.00

	Description	Click here for instructions on how to use the plank mold.
	Wooden Plank Mold #220
	Used to make wooden floors, cottages, stairs, bridges, doors, tables and almost any wooden objects you can think of.
	Price $29.00

	Description
	Inn Floor Mold #221
	Used to make wooden floors for inns and cottages. Includes 3 different plank patterns.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	1" Trench Plank Mold #222
	Used to make wooden trench walls or wood plank floors. Tiles are 1/4" thick and single planks are 1/8" thick.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	1.5" Trench Plank Mold #223
	Used to make wooden trench walls or wood plank floors. Tiles are 1/4" thick and single planks are 1/8" thick.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	Wooden Panel Mold #224
	Used to make solid wooden surfaces for walls and floors. Tiles and planks are 1/8" thick.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	Half Timber Mold #225
	Used to add wooden decorations onto the sides of houses. All pieces are 1/8" thick.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	Wooden Beam Mold #226
	Used to build open wooden structures such as stables and workshops. All pieces are 1/4" thick.
	Price $29.00

	Description	Click here for instructions on using this mold.
	Tavern Window & Door Mold #227
	Used to add decorative windows and doors to buildings. Shown being used with half timber and panel pieces. Pieces are 1/8" thick.
	Price $29.00

	Description
	Gothic Roof Mold #235
	Used to make ornamental roofs for churches and cathedrals. Includes tile pieces, roof peak, railings for side and front, and rail connectors with face design drainage spout.
	Price $29.00

	Description
	Wood Shingle Roof Mold #240
	Used to make wood shingle roofs quickly and easily. Click here to see examples.
	Price $29.00

	Description	Click here to see examples of how this mold can be used.
	Slate Shingle Roof Mold #245
	This mold will make flat slate shingle roofs quickly and easily. Also includes stone braces and top decoration.
	Price $29.00

	Description	Click here to see examples of how this mold can be used.
	Small Block Mold #250
	Used to make small stone items such as fireplaces, tombs, forges, wells, etc. Also can be used to make small brick wall sections for scales less than 25mm.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	Stucco Panel Mold #251
	Used to make solid stucco surfaces for walls. Tiles are 1/8" thick. Planks to cover seams are from mold #225.
	Price $29.00

	Description	Click here for instructions on how to use this mold.
	Rubble Panel Mold #252
	Used to make rubble rock surfaces for walls and floors. Tiles are 1/8" thick. Planks to cover seams are from mold #225.
	Price $29.00

	Description	Click here for instructions on using this mold.
	Brick Panel Mold #253
	Used to make brick surfaces for walls and floors. Tiles are 1/8" thick. Planks to cover seams are from mold #225.
	Price $29.00

	Description	Click here for instructions on how to build the bridge.
	Rubble Bridge Mold #259
	Used to make rubble bridge sides. All blocks are 1/4" thick. Pieces include large arches and railings.
	Price $29.00

	Description
	Rubble Slab Mold #262
	Used to make quick rubble wall sections. Rows can be snapped apart.
	Price $29.00

	Description	Click here for instructions on using the Flagstone Mold.
	Rubble Block Mold #263
	Used to make irregular stone walls and structures.
	Price $29.00

	Description	Photos and instructions coming soon.
	Rubble Floor Tile Mold #264
	Used to make rubble floor tiles. These can be arranged in a grid for easy character movement or randomized using the smaller pieces for a fairly seamless floor.
	Price $29.00

	Description
	Brickwork Floor Tile Mold #268
	These 1 1/2" floor tiles have two different styles of brick texture on them which work nicely for streets or paved areas.
	Price $29.00

	Description	Photos and instructions coming soon.
	Large Rubble Floor Tile Mold #269
	Used to make 1 1/2" square rubble floor tiles. They are 1/4" thick and match the same texture as mold #264.
	Price $29.00